夜上海最新论坛

 Steam generator manufacturer
Your current location: home page > Jiangxi steam generator

contact us Contact Us

Henan Yuji Boiler Vessel Manufacturing Co., Ltd

Service hotline: 400-032-0266

Tel: 0373-5850299

Contact: Manager Xu 17530719767

Email: [email protected]

Website: pinpaicloud.cn

Address: No.8 Jizhong Road, Xiaoji Town, Xinxiang, Henan


 Jiangxi full premixed tubular chamber steam generator

Jiangxi full premixed tubular chamber steam generator

  • Classification: Jiangxi steam generator
  • Number of views: second
  • Date of issue: 2023-07-31 14:48:49
  • Product Overview
  • Performance characteristics
  • technical parameter

1、 Product Introduction

    The product runs automatically, with personalized design, and all programs are concentrated on one control system, which is convenient for each operator.

   Full automatic intelligent electronic control system with LCD display:

The equipment operating system is automatically controlled, and all operating states can be clearly seen in the LCD screen. You can observe the equipment working status, equipment water level status, steam pressure high and low status, water pump operating status, fault alarm status, etc. in the display screen, so that you can keep abreast of the equipment operating status at any time and use with more confidence.

Full premixed surface combustion:

The fully premixed surface combustion technology is a gas combustion technology, in which gas and air are fully premixed before entering the combustion chamber to make combustion more fully, improve combustion efficiency and reduce the release of harmful gases. Its characteristics are as follows:

 1 )The traditional high-pressure jet gas burner uses diffusion combustion, while the metal fiber burner uses a fully premixed surface combustion mode. When the air excess coefficient is small, the combustion is more sufficient, so the thermal efficiency is high, and CO emissions are low.

two )The flame of the metal fiber burner is short and uniform, without the local high temperature zone of the traditional jet burner. At the same time, the strength of the fire hole is low, and the resulting NOx is significantly reduced.

three )The metal fiber burner significantly reduces the combustion noise, thus reducing the flue noise.

four )Because of the compact structure of premixed flame, this advantage can be used to reduce the size of combustion chamber when designing combustion chamber.

five )It is convenient to obtain a large scale power adjustment range. Stable combustion can be achieved at 100-15000kw/m2 thermal intensity.

six )At low output, the metal fiber burner can use radiation heat transfer mode, which can increase the efficiency of heat exchange.

seven )It has small thermal inertia, so the temperature rises and cools faster, the infrared time is very short, and the temperature control is sensitive.

eight )As the medium at the furnace head of the metal fiber burner has fine pores and a certain thickness, the temperature difference between the internal and external surfaces of the medium is large, the tempering tendency of the metal fiber burner is lower, and it is safe and reliable.

   spare parts:

All pipelines and instruments are connected with stainless steel pipes or copper pipes. Domestic appliances are used, which are safe, reliable and luxurious.  

   Multiple interlocking safety protection function:

The product is equipped with overpressure protection such as safety valve and pressure controller verified by the inspection institute to prevent explosion accidents caused by excessive pressure of equipment; At the same time, it has extreme low water level protection, and the equipment will automatically stop working when the water supply stops, so as to prevent the electric heating elements from being damaged or even burned out due to dry burning of the equipment. The leakage protector ensures the safety of operators and equipment. Even if the circuit is short circuited or leaked due to improper operation of equipment, the equipment will automatically cut off the circuit and protect the operators and control lines in time.  

   Easy to install and use:

The products have passed strict commissioning before leaving the factory. Users only need to connect the power supply and water source, press the start key, and the equipment can enter the automatic operation state without complicated installation.  

   Scientific design, beautiful appearance:

The cabinet type scientific design style is adopted, the internal design structure is reasonable, and the maintenance is extremely convenient. The equipment shell adopts CNC cutting and CNC folding one-time forming process, with fine workmanship; The surface of the shell is treated with high-temperature spray, durable, and beautiful.  

Previous: period

Recent browsing: