Autoclave, also known as steam curing kettle, is a large pressure vessel with large volume and heavy weight. Autoclaves are widely used. A small amount of autoclaves are used for autoclaved curing of aerated concrete blocks, concrete pipe piles, lime sand bricks, coal ash bricks, microporous calcium silicate boards, insulating asbestos boards, high-strength gypsum and other construction materials.

Autoclave manufacturer Expression application Autoclave Its interior is a high temperature and high pressure environment. In this case, there must be difficulties in sealing. Therefore, a strong sealing function is required to ensure the use of equipment and complete the task of autoclave maintenance, which is mainly reflected in the rubber seal ring. The function of the sealing ring is related to the autoclave equipment products. An outstanding sealing function can prevent steam leakage due to the gap between the tank door and the process production during production.

Through type or end type. The through type refers to the kettle cover installed at both ends, and the end type refers to the kettle cover installed at one end. Opening mode of kettle cover: tooth type quick opening structure, driving mode: dynamic, electric, pneumatic and hydraulic. It is also equipped with kettle door opening and closing safety interlock installation.

The autoclave is sealed through the rubber seal ring, but pressing the autoclave door on the rubber ring after closing does not mean that it is fully sealed now. The autoclave is sealed in the process of work, so this sealing method is needed to prevent leakage. Therefore, the inflatable seal is used, and the rubber ring needs to be inflated to achieve the sealing effect. The main air pressure comes from the pressure in the autoclave itself, so this sealing method has the better sealing effect when the pressure in the autoclave is higher.

Autoclave manufacturer It means that when the autoclave is used, it is usually just after closing the autoclave door and filling a little gas into the seal ring to eject it from the seal tank, and then it can be produced under normal pressure. The pressure brought by the steam in the autoclave will directly act on the seal ring. The greater the pressure in the autoclave, the tighter the seal can achieve a very good sealing effect, Of course, after being used for a period of time, the sealing effect will also become worse due to the loss problem. When it becomes worse, it should be replaced in time.