in recent years, Oil fired gas steam generator Equipment appears more and more frequently in all walks of life, while the chemical industry Gas steam generator The demand for. It is usually used for chemical purification, dyeing and finishing process, reactor heating, etc Steam generator Now let's talk about how several chemical processes use gas steam generators.

Dyeing and finishing process: the chemical industry has to mention the dyeing and finishing process. Dyeing and finishing is the process of chemical treatment of textile materials such as fibers and yarns, including pretreatment, dyeing, printing and finishing. The heat source required for the process is basically supplied by steam. However, fiber materials need to be washed and dried repeatedly after chemical treatment. It is difficult to achieve accurate temperature and pressure control using traditional methods New steam generator ——The variable frequency module steam source can intelligently adjust the steam pressure and evaporation capacity according to the actual production situation, effectively reducing the waste of steam heat source. The steam source of gas steam generator can produce a large amount of steam in 5 seconds, intelligent temperature and pressure control, energy saving; No work, no inspection, one button automatic operation, reducing labor management costs.

Reaction kettle heating: as a common equipment in modern industrial production, reaction kettle is widely used in food processing, pharmaceutical production, dye processing, petrochemical industry, rubber manufacturing, pesticide manufacturing and other industries. Reactors are often used in the production process to complete the vulcanization, hydrogenation, alkylation, polymerization, condensation and other processes of raw materials. During the use of the reaction kettle, whether heating or cooling should be carried out within the reasonable temperature difference range. Generally, the steam use temperature should be less than 180 ℃, the temperature difference thermal shock should be less than 120 ℃, and the cooling shock should be less than 90 ℃. This requires us to use a stable heat source in the process of using the reactor for heating. In the past, coal-fired, gas-fired and oil fired hot water boilers were commonly used as heat sources for reaction kettles. However, with the gradual improvement of the national requirements for environmental protection and the prevention of production accidents, it is better to use a steam generator to heat the reactor. A new steam generator is recommended for reactor heating, which is relative to fuel oil Gas steam generator equipment In terms of energy conservation, low nitrogen, environmental protection, economy, and no potential safety hazard.