Gas steam generator Failure to heat the furnace in the specified way will cause cracking, deformation and collapse of the furnace wall, endangering the safe operation and service life of the furnace.

Heating furnace use:

The newly installed gas-fired boiler heating furnace stores moisture in the whole process of furnace raw materials and wall construction. When it comes into contact with high temperature smoke and dust, due to the high temperature, a large amount of moisture in the furnace wall volatilizes, generating a large amount of steam, working pressure and high temperature, leading to deformation and cracking of the furnace wall. Therefore, before the newly installed gas boiler is declared to be put into use, the furnace body must be heated slowly to make the water in the furnace wall of the gas boiler evaporate slowly, so as to ensure the product quality of the thermal operation of the gas boiler body.

Gas Steam generator Necessary conditions in front of the heating furnace: the steam pipeline is installed and the pressure test is qualified. The wall building, heat preservation and heat preservation of the furnace body have been completed, and the project has passed the acceptance. After the installation of flue gas duct and insulation, centrifugal fan shall be installed and adjusted to the standard. The installation, calibration and inspection of the insulation instruments and equipment required for the heating furnace are qualified. Mortar mixture placed on both sides of the middle of the heating surface.

Firewood, diesel engine, coal and various special tools (including inspection, site lighting, etc.) are used for heating furnace.

Install all heating furnace equipment, remove all temporary equipment irrelevant to the heating furnace, and keep the site clean.

Heating furnace employees have been trained to meet the standards