Electric steam generator It is also called small electric steam boiler and small electric steam boiler. It is a micro boiler, which can automatically replenish water and heat, and generate low-pressure steam in succession. Small water tank, water pump and control operating system are integrated. No complicated device is required, just plug in water and power supply.
Its basic operating principle is to ensure that the liquid controller or high, medium and low electrode probes feedback control the opening and closing of the water pump, the time of water supply and the time of heating during operation through the automatic control device. Furnace; Set a larger steam pressure, and with the continuous output of steam, the water level of the furnace will continue to drop. When the water level is at low level (mechanical) and medium level (electronic), the pump will automatically replenish water.
When the water level reaches the high level, the water pump stops supplying water. At the same time, the electric heating tube in the furnace continuously heats, and the source continuously generates steam. The pointer pressure gauge on the upper or top of the panel will immediately display the steam pressure value, and the whole process can automatically display through the indicator light.
1. The burner shall be taken out from the boiler body every two months to remove foreign matters, such as carbon deposits and dust. The photocell shall be scrubbed once a month, and the fuel filter shall be cleaned and filtered all the time. Carefully clean the filter in the pump and do not damage the gasket. The burner shall not idle without oil to avoid damaging the oil pump.
2. Cut off the power supply and release the pressure when maintaining the boiler.
3. Pull the safety valve once a day to prevent rust.
4. The water level gauge shall be kept clean all the time, and the cleaning valve shall be opened once a day to ensure that the water level is clear.
For more information, you can follow us Electric steam generator manufacturer 。
