Biomass steam generator Advantages of energy conservation and environmental protection

biomass Steam generator As one of the main equipment for burning biomass fuel, it directly burns solid biomass pellet fuel, which is mainly used for hot water, bathing and heating in homes, hotels, hotels and other places. As the fuel is biomass fuel with reasonable structure, it basically achieves the effect of smokeless and complete combustion, and its emissions meet the requirements of environmental protection, with good economic, social and environmental benefits.

Combustion characteristics of biomass fuel After the formation of biomass fuel under high pressure, its density is far greater than the original biomass, and the combustion is relatively stable. Although the ignition temperature increases, the ignition performance decreases, but the ignition performance is better than that of coal. Because biomass fuel is a bulk fuel formed by high pressure, its structure and microstructure characteristics determine that its volatile emission rate and heat transfer rate are greatly reduced, but it is easier than coal.

Therefore, the volatile fuel characteristic index of biomass fuel is greater than that of coal, and the combustion characteristic index is greater than that of coal. The combustion speed is moderate, and the heat released by volatiles can be transferred to the heating surface in time, reducing the heat loss of exhaust gas; At the same time, the oxygen required for volatile combustion is completely matched with the oxygen diffused from the outside, the combustion wave is small, and the solids are reduced. Heat is lost with exhaust gas.

1. Economical and energy-saving: the new generation of biomass pellet fuel can save 30% - 60% of the operating cost compared with oil, gas and electric heating boilers.

2. Convenient installation: this series of generators do not need to be inspected, and the tedious annual approval procedure can be avoided. At the same time, the machine is assembled for modules and does not need to install installation programs.

3. High efficiency operation: adopt the design of multiple flue gas backflow, optimize oxygen enrichment for many times, cooperate with dust removal and energy saving equipment, the thermal efficiency reaches more than 90%, and can continuously produce steam.