Which industries will use HRSG? Waste heat boiler is the main source of heat recovery. It can be divided into waste gas waste heat boiler, waste water waste heat boiler, waste liquid waste heat boiler, waste material (slag carbon slag) waste heat boiler. At present, the waste heat boiler in the industry generally refers to the circulating unit that recovers the waste gas, oil and gas from various industrial processes, and the boiler that recycles and reuses the high-temperature flue gas heat discharged from the gas turbine, also known as the waste gas boiler. Waste heat boiler has been widely used in all walks of life.

Customized manufacturer of waste heat boiler It means that the waste heat boiler can be used in petrochemical industry and other industries. During the production and refining process, the high-temperature flue gas discharged from the boiler and other equipment is recycled by the waste heat boiler, and the output steam and hot water are used for the heating and transmission of crude oil. In thermal power plants and other industries, coal-fired boilers emit a large amount of high-temperature flue gas, and the heat loss of boiler flue gas accounts for 5%~10% of boiler heat, so supporting waste heat boilers is a good choice. It is worth mentioning that the waste heat boiler is usually used together with the low-temperature economizer, so as to make full use of the waste heat of flue gas and achieve obvious energy-saving economic effect. Ferroalloy, coal mine, coking plant and other industries, waste heat boilers recycle a large amount of high-temperature flue gas emitted by smelting furnaces, submerged arc furnaces, and coking furnaces. These industries emit a large amount of waste gas with high flue gas temperature, good flue gas quality, and large power consumption of the industry itself. Some of these waste heat boilers are used for waste heat recovery to generate steam and used in power generation.

Customized manufacturer of waste heat boiler It indicates that the waste heat boiler is composed of drum, movable smoke hood, flue at the furnace mouth section, flue at inclined section 1, flue at inclined section 2, flue at last section 1, flue at last section 2, feeding pipe (blanking chute) trough, oxygen port, nitrogen sealing device and nitrogen sealing plug, manhole, micro differential pressure tapping device, support and hanger of flue, etc. The waste heat boiler is divided into six circulation loops. Each circulation loop is composed of downcomer and riser. The feed water of each section of flue is introduced from the drum through downcomer to the lower header of each flue, and then enters into each heating surface. The water passes through the heating surface, generates steam, and enters the inlet header, and then is introduced into the drum through the riser. All flues are connected by flanges. Our company can customize the tonnage of waste heat boiler according to needs, and we need to contact.