Purchased Steam generator When people operate the generator correctly, they will inevitably encounter problems of one kind or another. How can we solve this problem ? Gas steam generator As a clean energy, it is favored by all walks of life. It uses natural gas as fuel. In the process of using gas boiler, we may encounter some situations. At this time, first find out the cause of the fault and take measures to solve the problem.

Connect the power supply, press Start, and the motor will not rotate. reason: Insufficient air pressure lock 、 The solenoid valve is not tight, and there is air leakage at the connector. Check the locking Open circuit of thermal relay 、 At least one conditional circuit is invalid ( Whether the water level, pressure, temperature and program controller are powered on and started ) 。 Troubleshooting measures (1) Adjust the air pressure to the specified value (2) Clean or repair the solenoid valve pipe connector (3) Press reset to check whether the element is damaged and the motor current (4) Check whether the water level, pressure and temperature exceed the limit.

The front purging is normal after startup, but the ignition cannot be started. Cause of fault: Insufficient electricity, fire and gas 、 Solenoid valve does not work ( Main valve, ignition valve )、 Solenoid valve burned out 、 Unstable air pressure 、 The air volume is too large. Troubleshooting: (1) Check the circuit and repair it (2) Renew (3) Adjust the air pressure to the specified value (4) Reduce air distribution and air valve opening

If the ignition fails, the air pressure is normal, and the electricity does not ignite. reason: Ignition transformer burned out 、 High voltage wire is damaged or falling off 、 The clearance is too large or too small, and the relative size of ignition rod position 、 The electrode is broken or short circuited to the ground 、 Improper spacing. Troubleshooting: (1) Renew (2) Reinstall or replace (3) Readjust (4) Reinstall or replace (5) Readjust

After ignition 5S Rear flameout. reason: The air pressure is insufficient, the pressure drop is too large, and the air supply flow is too small 、 The air volume is too small, the combustion is not sufficient, and the smoke color is thick 、 The air volume is too large and white air appears. Troubleshooting: (1) Readjust the air pressure and clean the filter screen (2) Readjust (3) Readjust.

White smoke. reason: The air volume is too small 、 The air humidity is too high 、 The exhaust gas temperature is low. Troubleshooting: (1) Regulating damper (2) Properly reduce the air volume and increase the air inlet temperature (3) Take measures to increase the exhaust gas temperature

Gas steam generator The chimney drips. reason: (1) Low ambient temperature (2) More small fire combustion processes (3) Gas has high hydrogen content and high oxygen content, generating water (4) The chimney is long. Troubleshooting: (1) Reduce air distribution (2) Reduce chimney height (3) Increase furnace temperature.