夜上海最新论坛

 Steam generator manufacturer
Your current location: home page > News > Industry information

Small steam generator manufacturers share the working process of steam generator

2020-06-09 11:09:11
second

Steam generator It is a mechanical equipment that uses the heat energy of fuel or other energy sources to heat water into hot water or steam. Nowadays, many people define steam generator and steam boiler as one kind. They have many similarities and differences. today Small steam generator manufacturer ——The small editor of Henan Henan Hebei Boiler will talk about the working process of steam generator.

The raw water is heated by industrial steam in the primary effect preheater, and then the secondary effect preheater is continuously heated by condensed water; Then, after entering the top of the evaporator and passing through the water separating device, it is evenly distributed into the evaporation tubes, forming a film like water flow in the evaporation tubes; These water flows evaporate quickly because they are thin, generating secondary steam; Raw water not evaporated is discharged outside the machine. The evaporated raw water, now the secondary steam, continues to spiral up in the evaporator, passes through the steam water separation device, and is output from the pure steam outlet as pure steam. Industrial steam Small steam generator The heat absorbed by the raw water is condensed into industrial steam condensate as the heating source of the preheater, and the preheated raw water is discharged from the non condensed water discharge outlet of the preheater. The trace pure steam is collected by the condensing sampler, and is cooled into distilled water after heat exchange with cooling water; Determine whether the pure steam is qualified through online detection of conductivity.

The secondary steam converted from raw water is clean steam, which is separated for three times: after entering the evaporator at the beginning,; The evaporated raw water (secondary steam) turns back 180 degrees at the lower end of the evaporator, and impurities are separated to the lower part under the action of gravity, which is a secondary separation; The evaporated raw water, i.e. secondary steam, continues to spiral up in the evaporator to the special separation device at the middle and upper part for the third separation.

There is a part of gas in the raw water that cannot be condensed into water, called non condensable gas. This part of non condensable gas is equipped with a continuous discharge device of non condensable gas at the top of the steam generator according to the degree of automation control.

The above is small Steam generator manufacturer I hope that the content can provide you with some help.

 Small steam generator manufacturer


Recent browsing: