Steam generator Also called steam heat source machine (commonly known as boiler) is a mechanical equipment that uses the heat energy of fuel or other energy sources to heat water into hot water or steam. Steam generator is a thermal equipment with high temperature and pressure, which is one of the special equipment. It is widely used in institutions, enterprises and all walks of life. It is dangerous and special equipment. Once an accident occurs, it will cause great losses to the life and property of the country and people. Pay attention to the following items when using the boiler:

Henan Gas steam generator manufacturer It means that when the machine is started, contact the instrument worker to input the steam drum pressure, steam drum liquid level, feedwater flow and steam flow instruments to ensure that the instruments are easy to use. Close the bypass valve of oil cooling circuit and pass the process of high-temperature oil heating circuit. Then slowly open the regulating valve of high-temperature oil cooling circuit to allow high-temperature oil to enter the steam generator on the tube side. At this time, pay attention to control the water level of the steam drum and control the rising speed of temperature and pressure. Heating speed shall not be greater than 50 ℃ (cooling speed shall not be greater than 70 ℃). When the pressure of the steam drum rises to 0.3-0.5mpa, and when the pressure rises to 1.0MPa, contact relevant personnel to conduct hot tight flushing of the sampling pipe and liquid level, put in continuous blowdown, adjust the heat source, and temporarily stabilize the pressure operation. After the drum pressure rises, contact relevant personnel to check the constant pressure of the drum safety valve. Keep the pressure at 1.0MPa, slowly open the main steam valve of the steam drum and close the vent valve. Pay attention to keep the pressure of the steam drum not too high, and the 1.0MPa steam generated will be incorporated into the plant pipe network.

Henan gas steam generator manufactor It is worth noting that the boiler shall be inspected regularly once a year, and the boiler without regular safety inspection shall not be used. The safety valve of the safety accessories of the boiler shall be regularly inspected once a year, and the pressure gauge shall be verified once every half a year. The safety accessories that have not been regularly inspected shall not be used.