Steam generator manufacturer It means that the cleaning should be correct Steam generator To understand the structure, material and heat transfer mode. There are dozens of steam generators put on the market, each of which uses different heat exchange methods, structures and materials. Different cleaning methods should be adopted for different structures and materials. It is necessary to analyze and test different areas, different water quality and different scales, configure different chemical cleaning agents for different materials and scales, and develop scientific and reasonable cleaning plans.

Cleaning critical work procedure: descaling and cleaning. Add the configured descaling cleaning agent into the circulating water of the cleaning tank in proportion to clean and descale the steam generator. Determine the time of cleaning cycle and the amount of agent added according to the amount of scale, and then move to the next cleaning procedure after confirming that all scales have been cleaned. Clean with clean water. After the cleaning equipment is connected to the steam generator, clean it with clean water for 10 minutes, check the system status for leakage, and clean the floating rust. Stripping and anti-corrosion cleaning. Add surface stripping agent and slow-release agent into the circulating water of the cleaning tank in proportion, and clean the tank for 20 minutes in a cycle to separate the scale from the cleaned parts. At the same time, carry out anti-corrosion treatment on the surface of objects without scale to prevent the detergent from corroding the cleaned parts during descaling and cleaning. Passivation coating treatment. Add passivation coating agent to conduct passivation coating treatment on steam generator cleaning system to prevent pipeline and component corrosion and new rust generation.

Well, that's all for steam generator cleaning. If you have any questions, please consult Steam generator plant home 。 Welcome to inquire.