Electric heating is an important part of steam power plant Steam generator 。 Industrial boiler is an essential equipment to provide steam for production and heating in various industrial enterprises. Because there are many industrial boilers, they need to consume a lot of fuel. The waste heat boiler using high-temperature waste gas as heat source in the production process plays an important role in energy saving.

How to reduce Gas steam generator Heat loss? Listen Gas steam generator manufacturer Answer: Reduce the heat loss of smoke exhaust: properly control the air coefficient; Regularly check the flue for air leakage; Minimize the use of cold air during system operation; Soot blowing and coke removal shall be carried out in time to keep all heating surfaces, especially the heating surface of the air preheater, clean to reduce the exhaust gas temperature; The hot air at the top of the gas steam generator or the hot air in the skin wall of the tail heating surface shall be used as far as possible for air supply and inlet. Reduce chemical heat loss: mainly maintain appropriate excess air coefficient, keep all burners from oxygen deficient combustion, maintain high temperature and fully mix fuel and air.

Arrangement of heat exchange system: the steam generation system and superheated steam system included in the heat exchange system shall be arranged together to reduce energy loss in transmission. The difference between the two systems is that their heat exchange temperature levels are different and the medium phase states are different. The layout shall be as close as possible to the outlet of the solar energy collection system, and can be located at the side of the mirror field. The heat storage system should be placed between the outlet of the acquisition system and the steam generation system or on the side, and the distance should not be too far.   Reduce mechanical heat loss: reasonable excess air coefficient shall be controlled; Keep qualified pulverized coal fineness; Gas steam generator plant home It indicates that the volume and height are reasonable, and the burner has good structural performance and proper layout; 1、 The secondary air speed shall be adjusted reasonably, and the secondary air speed shall be properly increased to strengthen combustion; The aerodynamic field in the gas steam generator is in good condition, and the flame can fill the gas steam generator. Reduce heat dissipation loss: the metal structure of gas steam generator and the thermal insulation of smoke and air pipes, steam water pipes, headers and other parts within the scope of gas steam generator shall be maintained. Reduce heat loss of blowdown: ensure water supply quality and reduce blowdown rate.